dco-2-5t Digital Compression Load Cell 5 Ton
High-accuracy industrial hopper scales, asphalt mix plants, chemical batch reactors.
5 Ton (5,000 kg)
IP68 Hermetic Seal
المواصفات الميتورولوجية والكهربائية الدقيقة
الإصدار: 2026.1 / فحص المعايرة معتمد| الهيكل الإنشائي للمكون | Digital Compression Pillar |
| Calibrated Rated Capacity | 5 Ton (5,000 kg) |
| Rated Output / Sensitivity | Digital Counts (Up to 1,000,000 Internal Counts) |
| Combined Total Error | ≤ ±0.02% FS |
| Bridge Input / Output Impedance | الدخل: RS485 Multi-Drop Bus | الخرج: 120 Ω Terminated Bus |
| مقاومة العزل الكهربائي | ≥ 5000 MΩ (تم الفحص عند 50V DC) |
| Excitation Supply Voltage | 9V - 15V DC |
| نطاق درجات الحرارة المعايرة | -30°C to +70°C |
| Safe / Ultimate Overload Margins | الآمن: 150% FS | القصوى: 300% FS |
| مواصفات الكيبل المدمج | 10m 5-Wire High-Flex Polyurethane Cable |
dco-2-5t: Digital Compression Pillar Metallurgy, Sealing & Mounting Architecture
Heavy Weighbridge Compression ArchitectureStainless Steel Body with Hermetic Welds. Specifically engineered for Digital Compression Pillar service in High-accuracy industrial hopper scales, asphalt mix plants, chemical batch reactors.
- High-tensile alloy or 17-4 PH stainless steel hardened to eliminate zero shift under repetitive 45-ton tandem truck axle impacts.
- Rated for capacity of 5 Ton (5,000 kg) with safe overload margin of 150% FS and ultimate breakload of 300% FS.
- High elastic recovery prevents zero balance shift under dynamic braking and acceleration forces.
Full true hermetic enclosure with laser-welded stainless steel bellows or diaphragms (IP68 Hermetic Seal).
- Tested for continuous submersion at 1.5m water depth for 100+ hours without moisture ingress.
- Compensated temperature range (-30°C to +70°C) prevents thermal span drift in Iraqi desert climates.
- Equipped with 10m 5-Wire High-Flex Polyurethane Cable with internal water-blocking filler to prevent capillary fluid migration.
Mounting Kinematics & Side-Load Rejection
Eliminates analog junction boxes; each load cell is calibrated independently in factory.
dco-2-5t: Wiring Pinouts, Conductor Coding & Summing Interfacing
مخطط التوصيلات والمنافذ| RED | + Excitation Supply (+Exc): 9V - 15V DC |
| BLACK | - Excitation Return (-Exc) |
| GREEN | + Signal Output (+Sig): Digital Counts (Up to 1,000,000 Internal Counts) |
| WHITE | - Signal Return (-Sig) |
| BLUE / BRN | + / - Sense Leads (6-Wire Remote Sensing) |
| YELLOW | Braided Shield / Earth Ground: 10m 5-Wire High-Flex Polyurethane Cable |
- Bridge Impedance: Input RS485 Multi-Drop Bus | Output 120 Ω Terminated Bus ensures balanced summation in multi-cell weighbridges.
- Sensitivity Calibration: Digital Counts (Up to 1,000,000 Internal Counts) with combined error ≤ ±0.02% FS guarantees trade precision.
- Digital / Analog Summing: Direct connection to stainless junction boxes with multi-turn corner trimmers.
- Overload Barrier: Safe overload 150% FS and ultimate overload 300% FS.
dco-2-5t: Regional Field Performance Across Iraq & COSQC Stamping
المطابقة القانونية COSQCHigh groundwater with extreme sulfate concentrations (>3,500 mg/L) causes rapid pin corrosion in generic cells. dco-2-5t features sealed construction tested for high saline and petrochemical marine environments.
Summer ambient temperatures reach +55°C, with direct metal surface exposure exceeding +75°C. Internal temperature compensation (-30°C to +70°C) preserves legal calibration.
Cement plant complexes and aggregate quarries generate intense dust and 45-ton axle shocks. Heavy metallurgy withstands abrasive silica dust without mechanical binding.
Iraqi COSQC Legal Metrology Compliance & Stamping
This component satisfies all regulatory requirements mandated by the Iraqi Central Organization for Standardization and Quality Control (COSQC) for trade-approved weighing instruments (OIML R60 C3 Digital).
المكونات المماثلة من Load Cells (Tab 1)
فريقنا الهندسي جاهز لخدمتكم
تواصل معنا الآن وسيقوم مهندسونا بتقديم الاستشارة الفنية وعرض السعر الأنسب لمشروعكم خلال أقل من ساعة.
طلب عرض سعر واستشارة هندسية فورية
دراسة فنية ومخطط إنشائي وعرض أسعار خلال أقل من 60 دقيقة
تواصل مباشر مع كبار مهندسي الموازين في كافة المحافظات العراقية
استلام فوري للمخططات الإنشائية (AutoCAD)، قوائم الأسعار والكتالوجات
إرسال وثائق المناقصات، جداول الكميات (BOQ) والمواصفات الرسمية
فرق هندسية متحركة تصل إلى موقعك في كافة محافظات العراق خلال 24–48 ساعة