cs-dc-30t Digital Canister Compression Load Cell 30 Ton

Hermetically Sealed Stainless Steel. Specifically engineered for Digital Canister Compression service in Advanced smart weighbridges, automated highway toll stations, unmanned scale facilities.

• High-tensile alloy or 17-4 PH stainless steel hardened to eliminate zero shift under repetitive 45-ton tandem truck axle impacts.
• Rated for capacity of 30 Ton (30,000 kg) with safe overload margin of 150% FS and ultimate breakload of 300% FS.
• High elastic recovery prevents zero balance shift under dynamic braking and acceleration forces.

Full true hermetic enclosure with laser-welded stainless steel bellows or diaphragms (IP68 / IP69K (High-Pressure Washdown & Submersible)).

• Tested for continuous submersion at 1.5m water depth for 100+ hours without moisture ingress.
• Compensated temperature range (-40°C to +80°C (Internal Sensor Temp Compensation)) prevents thermal span drift in Iraqi desert climates.
• Equipped with 16m 5-Core Shielded Digital Bus Cable with Heavy Metal Gland with internal water-blocking filler to prevent capillary fluid migration.

• Bridge Impedance: Input Digital RS-485 Interface (Bus Network) | Output Baud Rate: 9600 - 115200 bps ensures balanced summation in multi-cell weighbridges.
• Sensitivity Calibration: Internal 24-Bit A/D (Digital Counts Output) with combined error ≤ ±0.015% FS guarantees trade precision.
• Digital / Analog Summing: Direct connection to stainless junction boxes with multi-turn corner trimmers.
• Overload Barrier: Safe overload 150% FS and ultimate overload 300% FS.

High groundwater with extreme sulfate concentrations (>3,500 mg/L) causes rapid pin corrosion in generic cells. cs-dc-30t features sealed construction tested for high saline and petrochemical marine environments.

Summer ambient temperatures reach +55°C, with direct metal surface exposure exceeding +75°C. Internal temperature compensation (-40°C to +80°C (Internal Sensor Temp Compensation)) preserves legal calibration.

Cement plant complexes and aggregate quarries generate intense dust and 45-ton axle shocks. Heavy metallurgy withstands abrasive silica dust without mechanical binding.

Iraqi COSQC Legal Metrology Compliance & Stamping