TEC 1610 High-Precision Dual-Scale Weighing Terminal
Slow-motion weigh-in-motion (WIM), dynamic highway enforcement, dual platform truck scales.
100,000 Div • Alibi
IP65 Front Bezel
المواصفات الميتورولوجية والكهربائية الدقيقة
الإصدار: 2026.1 / فحص المعايرة معتمد| الهيكل الإنشائي للمكون | High-Precision Dual Scale Terminal |
| Calibrated Division & Scale Capacity | Simultaneous Axle Weight & Gross Vehicle Mass (Up to 150t) |
| A/D Converter Resolution & Conversion Rate | 0.08 μV/d Ultra-Sensitive 24-Bit A/D Converter (500 Hz) |
| A/D Linearity & Calibration Error | < 0.001% FS |
| Load Cell Excitation Drive Capacity | الدخل: Dual Load Cell Channels with Independent Zero Calibration | الخرج: Ethernet TCP/IP, Dual RS-232, Isolated Digital I/O (4 In / 4 Out) |
| مقاومة العزل الكهربائي | Complies with IEC 61000-4 Surge and Burst Standards (تم الفحص عند 50V DC) |
| Mains Power & Battery Supply | 10V DC, 400mA High Drive Capability |
| نطاق درجات الحرارة المعايرة | -20°C to +60°C |
| Electronic Safety & Surge Suppression | الآمن: Real-Time Wheel & Axle Imbalance Warning | القصوى: Industrial Switch-Mode Power Supply 100-240V AC with Earth Filter |
| مواصفات الكيبل المدمج | Ruggedized Industrial Terminal Blocks with Shield Lug |
TEC 1610: Enclosure Architecture, Industrial Ergonomics & Thermal Management
Metrological Terminal & Processor ArchitectureHeavy-Duty Industrial Anodized Enclosure. Engineered for 24/7 continuous weigh-cabin operation in Slow-motion weigh-in-motion (WIM), dynamic highway enforcement, dual platform truck scales.
- Heavy 304 stainless steel or die-cast aluminum chassis provides superior EMI/RFI shielding.
- Front-panel silicone membrane keypad tested for >1,000,000 tactile keystrokes with tactile click feedback.
- Adjustable multi-angle swivel mounting bracket allows desktop, wall, or control panel flush installation.
Sealed front panel engineered to withstand dusty scale cabins and high ambient light.
- IP65/IP66 front panel sealed against fine sand dust, moisture condensation, and office spills.
- High-contrast graphic or LED display provides wide 160° viewing angles in brightly lit weigh cabins.
- Double internal conformal coating on all digital and analog PCBs protects micro-traces from humidity corrosion.
Power Supply Resilience & Tamper-Proof Audit Rigor
Simultaneously captures individual axle weights, axle group weights, and total gross vehicle mass while vehicle crosses scale at speeds up to 15 km/h.
TEC 1610: Multi-Port Interfacing, Network Protocol & Peripheral Port Map
مخطط التوصيلات والمنافذ| LOAD CELL (DB9/7P) | +Exc, -Exc, +Sig, -Sig, +Sen, -Sen, Ground (Dual Load Cell Channels with Independent Zero Calibration) |
| COM 1 (RS-232) | Baud 1200–115200: Direct PC software streaming & continuous Modbus |
| COM 2 (RS-485 / CL) | 2-Wire differential / 20mA Current Loop to outdoor remote scoreboards: Ethernet TCP/IP, Dual RS-232, Isolated Digital I/O (4 In / 4 Out) |
| ETHERNET (RJ45) | 10/100 Mbps TCP/IP: Direct SQL database, SAP, and Weigh-OS integration |
| ANALOG OUT | 4–20mA / 0–10V Opto-isolated process output for PLC automation |
| RELAY I/O | 4 Opto inputs + 4 Relay outputs (Traffic lights, barrier gates, alarms) |
- Conversion Rigor: 0.08 μV/d Ultra-Sensitive 24-Bit A/D Converter (500 Hz) provides ultra-stable weight display in under 1.5 seconds.
- Alibi Non-Volatile Memory: Automatically logs up to 100,000 transaction records with zero data loss.
- Multilingual Ticket Printing: Direct output to Epson and dot-matrix printers in Kurdish, Arabic, and English.
- Surge Suppression: Industrial Switch-Mode Power Supply 100-240V AC with Earth Filter protects sensitive analog converters.
TEC 1610: Regional Field Performance Across Iraq & Power Grid Stability
المطابقة القانونية COSQCHeavy 24/7 dispatch cycles at Khor Al-Zubair and Safwan borders require internal thermal dissipation fans and tropicalized conformal PCB coatings.
Extreme summer temperatures (+55°C) and violent national grid power surges require the wide-range internal PSU and dual-stage TVS line protection.
High-speed weighing transactions for cement tankers and commercial trucks at Ibrahim Khalil and Parwezkhan with bilingual ticket receipts.
Iraqi COSQC Legal Metrology Approval (OIML R76 / R134 Weigh-In-Motion Class)
Certified compliant with OIML R76 Class III trade standards (10,000e approval). Meets legal requirements for Ministry of Trade and Ministry of Construction highway scales.
المكونات المماثلة من Indicators & Terminals (Tab 2)
فريقنا الهندسي جاهز لخدمتكم
تواصل معنا الآن وسيقوم مهندسونا بتقديم الاستشارة الفنية وعرض السعر الأنسب لمشروعكم خلال أقل من ساعة.
طلب عرض سعر واستشارة هندسية فورية
دراسة فنية ومخطط إنشائي وعرض أسعار خلال أقل من 60 دقيقة
تواصل مباشر مع كبار مهندسي الموازين في كافة المحافظات العراقية
استلام فوري للمخططات الإنشائية (AutoCAD)، قوائم الأسعار والكتالوجات
إرسال وثائق المناقصات، جداول الكميات (BOQ) والمواصفات الرسمية
فرق هندسية متحركة تصل إلى موقعك في كافة محافظات العراق خلال 24–48 ساعة