Super-Heavy Mining & Haul Truck Weighbridge (Up to 250t)

High-yield European hot-rolled structural steel with multi-rib torsional cross bracing.

Anti-skid tear pattern high-friction steel plate engineered for heavy brake traction.

Strictly limited to prevent weld fatigue and eliminate calibration sensor drift over decades.

Sandblasting SA 2.5 + zinc phosphate epoxy primer + aliphatic polyurethane topcoat (>240 µm).

150% continuous rated capacity with zero permanent metallurgical deformation.

Structural safety margin against catastrophic vehicle collisions or extreme over-mass.

Multi-point compression or double-ended shear beam load cell distribution.

17-4 PH stainless steel laser-welded hermetic capsule. Withstands continuous submersion.

Conforms to OIML R76 Class III & Iraqi Central Org for Standardization (COSQC).

High resolution division steps compliant with Iraqi commercial legal trade standards.

Dedicated earthing grid (< 1 Ohm ground impedance) protecting cells from thunderstorms.

Built-in thermal expansion bumper clearance prevents structural binding at +55°C.

Engineered CAD foundation drawings supplied with load cell anchor bolt placement templates.

Plate bearing test recommended; subbase gravel compaction to 95% Modified Proctor.

Sulfate-resistant cement (Type V) recommended for Basra and Southern Iraq saline soils.

Zero water retention design; pitless platforms utilize natural open air cross-drainage.