High-Speed Automatic Weighbridge Barrier Gate (3m - 6m)
Weighbridge perimeter access, commercial toll lanes, refinery checkpoint gates.
1.5s • 5000/day
IP55 Weatherproof Outdoor Mechanism
Precision Metrology & Electrical Specifications
SPEC VERSION: 2026.1 / CALIBRATION VERIFIED| Structural Architecture | High-Duty Cycle Automated Barrier Gate |
| Operational Duty & Daily Throughput | 100% Continuous Duty Cycle (Up to 5,000 Cycles/Day) |
| Anti-Smash & Sensor Interlocking | Built-in Anti-Smash Ground Inductive Loop Detector & Photocell Sensors |
| Stroke Deceleration & Dampening | Smooth Deceleration Dampening at End of Stroke |
| Control Trigger & Interface Logic | Input: Dry Contact Trigger, RS-485, Wireless Remote Control (30m Range) | Output: Open/Close Position Limit Switch Status Outputs |
| Insulation Resistance | Class F Motor Insulation (Tested at 50V DC) |
| Power Input / Supply Voltage | 220V AC 50Hz Brushless DC Motor (24V DC / 140W) |
| Compensated Temperature Range | -30°C to +70°C (Built-in Cooling Fan for Iraq Summer) |
| Safety Torque Sensing & Manual Release | Safe: Torque Sensing Motor Automatically Reverses on Obstacle Contact | Ultimate: Manual Hand-Crank Release during Total Power Outage |
| Integral Cable Specification | Multi-Conductor Control Cable & Ground Loop Feeder Cable |
Automatic Barrier Gate: Heavy-Duty Actuation Kinematics, Wind Resistance & Cabinet Enclosure
Automated Barrier Gate Architecture2.0mm Cold-Rolled Galvanized Steel Cabinet with High-Gloss Epoxy Powder Coat. Engineered for continuous 24/7 truck lane control under harsh Iraqi industrial conditions.
- 2.0mm heavy cold-rolled galvanized steel cabinet treated with multi-stage anti-rust phosphate primer and epoxy powder coat.
- Precision gear-driven or torque-motor mechanism immersed in extreme-temperature synthetic lubricant.
- Aerodynamic aluminum boom arm (3m to 6m) with internal stiffeners withstands high crosswinds without deformation.
IP55 weather-sealed mechanism engineered for 100% continuous daily operational duty.
- Rated for continuous heavy-duty service (100% Continuous Duty Cycle (Up to 5,000 Cycles/Day)) without motor overheating.
- Thermostatically controlled cooling fan and internal thermal cut-out protect electronic drive boards.
- Quick-release mechanical clutch allows instant manual gate opening during total power blackouts.
Anti-Smash Protection & Manual Emergency Release
High-speed brushless motor with zero maintenance gearbox; articulated or straight boom arm with red reflective warning stripes and LED lighting.
Automatic Barrier Gate: Digital Control Logic, Vehicle Loop Detectors & Automated Scale Integration
Hardware Interface Map| OPEN / CLOSE | Dry contact relay inputs: Dry Contact Trigger, RS-485, Wireless Remote Control (30m Range) |
| SAFETY LOOP | Inductive ground loop detector input prevents gate closure while truck is on scale |
| TRAFFIC LIGHT | 220V AC / 24V DC outputs controlling Red/Green LED traffic heads |
| SAFETY PHOTOCELL | Infrared beam safety interlock prevents boom from descending onto pedestrians or cabs |
| LIMIT SWITCHES | Status feedback contacts: Open/Close Position Limit Switch Status Outputs |
- Full Scale Cycle Automation: Red light stops truck -> Scale locks stable weight -> Green light turns on and barrier opens -> Truck exits -> Loop sensor auto-closes barrier.
- Anti-Tailgating Detection: Dual loop detectors prevent following vehicles from slipping through without a verified weighment ticket.
- Motor Drive System: 220V AC 50Hz Brushless DC Motor (24V DC / 140W) delivers 5,000,000 cycle MTBF with zero brush wear.
- Deceleration Profile: Smooth Deceleration Dampening at End of Stroke ensures smooth stop without bounce.
Automatic Barrier Gate: Regional Field Performance Across Iraq & Site Security
COSQC Legal VerificationHigh-frequency petroleum tanker throughput at refinery gates requires 100% duty cycle brushless DC motors that operate continuously in +55°C heat without thermal shutdown.
High airborne dust and intense heat. Sealed gearboxes with synthetic extreme-temperature oil eliminate maintenance and gear tooth wear under constant dust.
High-speed automated traffic control at Ibrahim Khalil border crossing and major cement plants in Bazian, speeding up truck throughput by over 300%.
Iraqi Commercial Weigh Station Security Standards
Engineered to comply with Iraqi Ministry of Transport regulations for unmanned, fraud-proof weighbridge stations and automated axle overload enforcement lanes.
Similar Traffic & Peripherals (Tab 5) Inventory
Consult With Our Weighbridge Engineers
Contact our engineering department today for customized advice, foundation drawings, and transparent pricing tailored to your site.
Request Direct Engineering Proposal
Technical specifications, AutoCAD layouts and formal pricing within 60 minutes
Direct access to Senior Metrology Engineers across all 18 Iraqi Governorates
Instant delivery of AutoCAD foundation blueprints, price lists & technical datasheets
Submit tender documents, BOQs, and formal project procurement specs directly
Mobile technical teams and calibration test trucks active in all Iraqi provinces