cs-dp-30t Digital Rocker Pin Load Cell 30 Ton
Heavy logistics truck scales, automated customs border weighing checkpoints in Iraq.
30 Ton (30,000 kg)
IP68 Hermetically Sealed
Precision Metrology & Electrical Specifications
SPEC VERSION: 2026.1 / CALIBRATION VERIFIED| Structural Architecture | Digital Rocker Pin Compression |
| Calibrated Rated Capacity | 30 Ton (30,000 kg) |
| Rated Output / Sensitivity | Digital Output Protocol (RS485 Full Duplex) |
| Combined Total Error | ≤ ±0.018% FS |
| Bridge Input / Output Impedance | Input: Digital Bus | Output: RS-485 Standard |
| Insulation Resistance | ≥ 5000 MΩ (Tested at 50V DC) |
| Excitation Supply Voltage | 12V DC |
| Compensated Temperature Range | -35°C to +75°C |
| Safe / Ultimate Overload Margins | Safe: 150% FS | Ultimate: 300% FS |
| Integral Cable Specification | 15m Armored Shielded Bus Cable |
cs-dp-30t: Digital Rocker Pin Compression Metallurgy, Sealing & Mounting Architecture
Heavy Weighbridge Compression ArchitectureHigh-Grade Quenched Alloy / Stainless Steel. Specifically engineered for Digital Rocker Pin Compression service in Heavy logistics truck scales, automated customs border weighing checkpoints in Iraq.
- High-tensile alloy or 17-4 PH stainless steel hardened to eliminate zero shift under repetitive 45-ton tandem truck axle impacts.
- Rated for capacity of 30 Ton (30,000 kg) with safe overload margin of 150% FS and ultimate breakload of 300% FS.
- High elastic recovery prevents zero balance shift under dynamic braking and acceleration forces.
Full true hermetic enclosure with laser-welded stainless steel bellows or diaphragms (IP68 Hermetically Sealed).
- Tested for continuous submersion at 1.5m water depth for 100+ hours without moisture ingress.
- Compensated temperature range (-35°C to +75°C) prevents thermal span drift in Iraqi desert climates.
- Equipped with 15m Armored Shielded Bus Cable with internal water-blocking filler to prevent capillary fluid migration.
Mounting Kinematics & Side-Load Rejection
Immunity to electrical noise; cables can run up to 1200 meters without signal degradation.
cs-dp-30t: Wiring Pinouts, Conductor Coding & Summing Interfacing
Hardware Interface Map| RED | + Excitation Supply (+Exc): 12V DC |
| BLACK | - Excitation Return (-Exc) |
| GREEN | + Signal Output (+Sig): Digital Output Protocol (RS485 Full Duplex) |
| WHITE | - Signal Return (-Sig) |
| BLUE / BRN | + / - Sense Leads (6-Wire Remote Sensing) |
| YELLOW | Braided Shield / Earth Ground: 15m Armored Shielded Bus Cable |
- Bridge Impedance: Input Digital Bus | Output RS-485 Standard ensures balanced summation in multi-cell weighbridges.
- Sensitivity Calibration: Digital Output Protocol (RS485 Full Duplex) with combined error ≤ ±0.018% FS guarantees trade precision.
- Digital / Analog Summing: Direct connection to stainless junction boxes with multi-turn corner trimmers.
- Overload Barrier: Safe overload 150% FS and ultimate overload 300% FS.
cs-dp-30t: Regional Field Performance Across Iraq & COSQC Stamping
COSQC Legal VerificationHigh groundwater with extreme sulfate concentrations (>3,500 mg/L) causes rapid pin corrosion in generic cells. cs-dp-30t features sealed construction tested for high saline and petrochemical marine environments.
Summer ambient temperatures reach +55°C, with direct metal surface exposure exceeding +75°C. Internal temperature compensation (-35°C to +75°C) preserves legal calibration.
Cement plant complexes and aggregate quarries generate intense dust and 45-ton axle shocks. Heavy metallurgy withstands abrasive silica dust without mechanical binding.
Iraqi COSQC Legal Metrology Compliance & Stamping
This component satisfies all regulatory requirements mandated by the Iraqi Central Organization for Standardization and Quality Control (COSQC) for trade-approved weighing instruments (OIML R60 C3 Digital Approved).
Similar Load Cells (Tab 1) Inventory
Consult With Our Weighbridge Engineers
Contact our engineering department today for customized advice, foundation drawings, and transparent pricing tailored to your site.
Hızlı Mühendislik Fiyat Teklifi
Teknik şartname, temel projesi ve şeffaf fiyatlandırma 60 dakika içinde
Tüm Irak vilayetlerinde kıdemli kantar mühendisleri ile doğrudan iletişim
AutoCAD temel projeleri, fiyat listeleri ve teknik kataloglar hemen cebinizde
Şartnameler, ihale evrakları ve resmi satın alma taleplerinizi doğrudan iletin
Gezici mühendislik ve kalibrasyon ekiplerimiz Irak genelinde 24-48 saatte sahada