cs-dc-30t Digital Canister Compression Load Cell 30 Ton
Advanced smart weighbridges, automated highway toll stations, unmanned scale facilities.
30 Ton (30,000 kg)
IP68 / IP69K (High-Pressure Washdown & Submersible)
Precision Metrology & Electrical Specifications
SPEC VERSION: 2026.1 / CALIBRATION VERIFIED| Structural Architecture | Digital Canister Compression |
| Calibrated Rated Capacity | 30 Ton (30,000 kg) |
| Rated Output / Sensitivity | Internal 24-Bit A/D (Digital Counts Output) |
| Combined Total Error | ≤ ±0.015% FS |
| Bridge Input / Output Impedance | Input: Digital RS-485 Interface (Bus Network) | Output: Baud Rate: 9600 - 115200 bps |
| Insulation Resistance | ≥ 5000 MΩ (Tested at 50V DC) |
| Excitation Supply Voltage | 9V - 18V DC Digital Power |
| Compensated Temperature Range | -40°C to +80°C (Internal Sensor Temp Compensation) |
| Safe / Ultimate Overload Margins | Safe: 150% FS | Ultimate: 300% FS |
| Integral Cable Specification | 16m 5-Core Shielded Digital Bus Cable with Heavy Metal Gland |
cs-dc-30t: Digital Canister Compression Metallurgy, Sealing & Mounting Architecture
Heavy Weighbridge Compression ArchitectureHermetically Sealed Stainless Steel. Specifically engineered for Digital Canister Compression service in Advanced smart weighbridges, automated highway toll stations, unmanned scale facilities.
- High-tensile alloy or 17-4 PH stainless steel hardened to eliminate zero shift under repetitive 45-ton tandem truck axle impacts.
- Rated for capacity of 30 Ton (30,000 kg) with safe overload margin of 150% FS and ultimate breakload of 300% FS.
- High elastic recovery prevents zero balance shift under dynamic braking and acceleration forces.
Full true hermetic enclosure with laser-welded stainless steel bellows or diaphragms (IP68 / IP69K (High-Pressure Washdown & Submersible)).
- Tested for continuous submersion at 1.5m water depth for 100+ hours without moisture ingress.
- Compensated temperature range (-40°C to +80°C (Internal Sensor Temp Compensation)) prevents thermal span drift in Iraqi desert climates.
- Equipped with 16m 5-Core Shielded Digital Bus Cable with Heavy Metal Gland with internal water-blocking filler to prevent capillary fluid migration.
Mounting Kinematics & Side-Load Rejection
Individual load cell addressability; diagnostic software pinpoints failing corner instantly.
cs-dc-30t: Wiring Pinouts, Conductor Coding & Summing Interfacing
Hardware Interface Map| RED | + Excitation Supply (+Exc): 9V - 18V DC Digital Power |
| BLACK | - Excitation Return (-Exc) |
| GREEN | + Signal Output (+Sig): Internal 24-Bit A/D (Digital Counts Output) |
| WHITE | - Signal Return (-Sig) |
| BLUE / BRN | + / - Sense Leads (6-Wire Remote Sensing) |
| YELLOW | Braided Shield / Earth Ground: 16m 5-Core Shielded Digital Bus Cable with Heavy Metal Gland |
- Bridge Impedance: Input Digital RS-485 Interface (Bus Network) | Output Baud Rate: 9600 - 115200 bps ensures balanced summation in multi-cell weighbridges.
- Sensitivity Calibration: Internal 24-Bit A/D (Digital Counts Output) with combined error ≤ ±0.015% FS guarantees trade precision.
- Digital / Analog Summing: Direct connection to stainless junction boxes with multi-turn corner trimmers.
- Overload Barrier: Safe overload 150% FS and ultimate overload 300% FS.
cs-dc-30t: Regional Field Performance Across Iraq & COSQC Stamping
COSQC Legal VerificationHigh groundwater with extreme sulfate concentrations (>3,500 mg/L) causes rapid pin corrosion in generic cells. cs-dc-30t features sealed construction tested for high saline and petrochemical marine environments.
Summer ambient temperatures reach +55°C, with direct metal surface exposure exceeding +75°C. Internal temperature compensation (-40°C to +80°C (Internal Sensor Temp Compensation)) preserves legal calibration.
Cement plant complexes and aggregate quarries generate intense dust and 45-ton axle shocks. Heavy metallurgy withstands abrasive silica dust without mechanical binding.
Iraqi COSQC Legal Metrology Compliance & Stamping
This component satisfies all regulatory requirements mandated by the Iraqi Central Organization for Standardization and Quality Control (COSQC) for trade-approved weighing instruments (OIML R60 C3 / C4 Digital Class).
Similar Load Cells (Tab 1) Inventory
Consult With Our Weighbridge Engineers
Contact our engineering department today for customized advice, foundation drawings, and transparent pricing tailored to your site.
Hızlı Mühendislik Fiyat Teklifi
Teknik şartname, temel projesi ve şeffaf fiyatlandırma 60 dakika içinde
Tüm Irak vilayetlerinde kıdemli kantar mühendisleri ile doğrudan iletişim
AutoCAD temel projeleri, fiyat listeleri ve teknik kataloglar hemen cebinizde
Şartnameler, ihale evrakları ve resmi satın alma taleplerinizi doğrudan iletin
Gezici mühendislik ve kalibrasyon ekiplerimiz Irak genelinde 24-48 saatte sahada