cr-1-5t Tension Link Crane Scale Load Cell 5 Ton

High-Strength Forged Alloy Structural Steel. Engineered for cyclical tensile fatigue (>2,000,000 cycles) at full capacity of 5 Ton (5,000 kg).

• High-tensile forged alloy steel or stainless steel hardened to resist sudden snatch loads and tensile yield.
• Engineered for Tension Link / Crane Hook ensuring high sensitivity and zero parasitic bending.
• Corrosion-resistant plating resists outdoor atmospheric oxidation in marine and oilfield sites.

Engineered with extreme safety margins: 200% FS safe overload and 400% Safety Factor ultimate breakload.

• Extreme breaking margin prevents catastrophic overhead drop hazards in crane hook and tensile testing applications.
• Sealed cavity (IP67 Environmental Protection) prevents internal strain gauge degradation from dust, oil spray, and rain.
• High-strength forged clevis eyes designed to mate with standard Crosby-type safety lifting shackles.

• Bridge Impedance: Input 385 ± 10 Ω | Output 350 ± 3 Ω ensures precise mV transmission over long hoist cables.
• Wireless Handheld Terminal: Sends live hook weight wirelessly (433MHz / 2.4GHz) to a handheld driver terminal with thermal printer.
• Overhead Hoist Cut-Off Relays: Instantaneous SPDT relay trigger opens when load reaches 105% of SWL, stopping hoist motors.
• Peak-Hold Capture: Captures peak tensile force during destructive pull testing and dynamic wire rope proof-loading.

Heavy container handling and oil rig drill-pipe hoisting require shackle load cells with anti-corrosive marine plating to survive saline sea air and sulfur vapors.

Electromagnetic scrap crane hooks operate above intense foundry radiant heat. High-temperature heat-shield jackets prevent cable melt and signal drift.

Overhead gantry cranes lifting 30-ton steel rebar coils and limestone blocks subject sensors to severe snatch loading during rapid hoisting.

Iraqi COSQC Legal Metrology Compliance for Crane Weighers