ac-1a-25t Stainless Steel Canister Compression Load Cell 25 Ton
Aggressive chemical environments, oil refineries in Basra, marine ports, cement factories.
25 Ton (25,000 kg)
IP68 / IP69K (Full High-Pressure Washdown Resistant)
Precision Metrology & Electrical Specifications
SPEC VERSION: 2026.1 / CALIBRATION VERIFIED| Structural Architecture | Canister Compression Pillar |
| Calibrated Rated Capacity | 25 Ton (25,000 kg) |
| Rated Output / Sensitivity | 2.0 ± 0.002 mV/V |
| Combined Total Error | ≤ ±0.02% FS |
| Bridge Input / Output Impedance | Input: 700 ± 7 Ω | Output: 703 ± 4 Ω |
| Insulation Resistance | ≥ 5000 MΩ (Tested at 50V DC) |
| Excitation Supply Voltage | 5V - 15V DC |
| Compensated Temperature Range | -40°C to +80°C |
| Safe / Ultimate Overload Margins | Safe: 150% FS | Ultimate: 300% FS |
| Integral Cable Specification | 15m 6-Core Armored Stainless Braided Cable |
ac-1a-25t: Canister Compression Pillar Metallurgy, Sealing & Mounting Architecture
Heavy Weighbridge Compression ArchitectureComplete Stainless Steel Body & Cup Assembly. Specifically engineered for Canister Compression Pillar service in Aggressive chemical environments, oil refineries in Basra, marine ports, cement factories.
- High-tensile alloy or 17-4 PH stainless steel hardened to eliminate zero shift under repetitive 45-ton tandem truck axle impacts.
- Rated for capacity of 25 Ton (25,000 kg) with safe overload margin of 150% FS and ultimate breakload of 300% FS.
- High elastic recovery prevents zero balance shift under dynamic braking and acceleration forces.
Full true hermetic enclosure with laser-welded stainless steel bellows or diaphragms (IP68 / IP69K (Full High-Pressure Washdown Resistant)).
- Tested for continuous submersion at 1.5m water depth for 100+ hours without moisture ingress.
- Compensated temperature range (-40°C to +80°C) prevents thermal span drift in Iraqi desert climates.
- Equipped with 15m 6-Core Armored Stainless Braided Cable with internal water-blocking filler to prevent capillary fluid migration.
Mounting Kinematics & Side-Load Rejection
Integrated gas-discharge lightning arrestor protecting against electrical thunderstorms.
ac-1a-25t: Wiring Pinouts, Conductor Coding & Summing Interfacing
Hardware Interface Map| RED | + Excitation Supply (+Exc): 5V - 15V DC |
| BLACK | - Excitation Return (-Exc) |
| GREEN | + Signal Output (+Sig): 2.0 ± 0.002 mV/V |
| WHITE | - Signal Return (-Sig) |
| BLUE / BRN | + / - Sense Leads (6-Wire Remote Sensing) |
| YELLOW | Braided Shield / Earth Ground: 15m 6-Core Armored Stainless Braided Cable |
- Bridge Impedance: Input 700 ± 7 Ω | Output 703 ± 4 Ω ensures balanced summation in multi-cell weighbridges.
- Sensitivity Calibration: 2.0 ± 0.002 mV/V with combined error ≤ ±0.02% FS guarantees trade precision.
- Digital / Analog Summing: Direct connection to stainless junction boxes with multi-turn corner trimmers.
- Overload Barrier: Safe overload 150% FS and ultimate overload 300% FS.
ac-1a-25t: Regional Field Performance Across Iraq & COSQC Stamping
COSQC Legal VerificationHigh groundwater with extreme sulfate concentrations (>3,500 mg/L) causes rapid pin corrosion in generic cells. ac-1a-25t features sealed construction tested for high saline and petrochemical marine environments.
Summer ambient temperatures reach +55°C, with direct metal surface exposure exceeding +75°C. Internal temperature compensation (-40°C to +80°C) preserves legal calibration.
Cement plant complexes and aggregate quarries generate intense dust and 45-ton axle shocks. Heavy metallurgy withstands abrasive silica dust without mechanical binding.
Iraqi COSQC Legal Metrology Compliance & Stamping
This component satisfies all regulatory requirements mandated by the Iraqi Central Organization for Standardization and Quality Control (COSQC) for trade-approved weighing instruments (OIML R60 C3 Approved).
Similar Load Cells (Tab 1) Inventory
Consult With Our Weighbridge Engineers
Contact our engineering department today for customized advice, foundation drawings, and transparent pricing tailored to your site.
Request Direct Engineering Proposal
Technical specifications, AutoCAD layouts and formal pricing within 60 minutes
Direct access to Senior Metrology Engineers across all 18 Iraqi Governorates
Instant delivery of AutoCAD foundation blueprints, price lists & technical datasheets
Submit tender documents, BOQs, and formal project procurement specs directly
Mobile technical teams and calibration test trucks active in all Iraqi provinces