IN STOCK IRAQ WAREHOUSE (ERBIL / BAGHDAD) | IP68 / IP69K (Full High-Pressure Washdown Resistant) | COSQC IRAQ VERIFIED
ac-1a-25t Load Cells (Tab 1) TAB-1

ac-1a-25t Stainless Steel Canister Compression Load Cell 25 Ton

Aggressive chemical environments, oil refineries in Basra, marine ports, cement factories.

Inquire Price & Stock All 52 Components
HARDWARE OPTICAL VIEW 25 Ton (25,000 kg)
ac-1a-25t Stainless Steel Canister Compression Load Cell 25 Ton 25 Ton (25,000 kg) IP68 / IP69K (Full High-Pressure Washdown Resistant)
Metrological Verification: OIML R60 C3 Approved
Nominal Capacity
25 Ton (25,000 kg) Standard calibrated rating
Ingress Protection
IP68 / IP69K (Full High-Pressure Washdown Resistant) Hermetic environmental barrier
Safe Overload Limit
150% FS Zero plastic deformation
Ultimate Breakload
300% FS Structural rupture barrier
Accuracy Class
OIML R60 C3 Approved OIML R60 / R76 Certified
Operating Temp
-40°C to +80°C Desert thermal compensated
Chassis Material
Complete Stainless Steel Body & Cup Assembly Heavy industrial grade
Combined Error
≤ ±0.02% FS Non-linearity + hysteresis

Precision Metrology & Electrical Specifications

SPEC VERSION: 2026.1 / CALIBRATION VERIFIED
Scroll table horizontally to view complete data
Structural Architecture Canister Compression Pillar
Calibrated Rated Capacity 25 Ton (25,000 kg)
Rated Output / Sensitivity 2.0 ± 0.002 mV/V
Combined Total Error ≤ ±0.02% FS
Bridge Input / Output Impedance Input: 700 ± 7 Ω | Output: 703 ± 4 Ω
Insulation Resistance ≥ 5000 MΩ (Tested at 50V DC)
Excitation Supply Voltage 5V - 15V DC
Compensated Temperature Range -40°C to +80°C
Safe / Ultimate Overload Margins Safe: 150% FS | Ultimate: 300% FS
Integral Cable Specification 15m 6-Core Armored Stainless Braided Cable

ac-1a-25t: Canister Compression Pillar Metallurgy, Sealing & Mounting Architecture

Heavy Weighbridge Compression Architecture
ac-1a-25t Metallurgy & Structural Analysis

Complete Stainless Steel Body & Cup Assembly. Specifically engineered for Canister Compression Pillar service in Aggressive chemical environments, oil refineries in Basra, marine ports, cement factories.

  • High-tensile alloy or 17-4 PH stainless steel hardened to eliminate zero shift under repetitive 45-ton tandem truck axle impacts.
  • Rated for capacity of 25 Ton (25,000 kg) with safe overload margin of 150% FS and ultimate breakload of 300% FS.
  • High elastic recovery prevents zero balance shift under dynamic braking and acceleration forces.
Hermetic Laser Sealing (IP68 / IP69K (Full High-Pressure Washdown Resistant))

Full true hermetic enclosure with laser-welded stainless steel bellows or diaphragms (IP68 / IP69K (Full High-Pressure Washdown Resistant)).

  • Tested for continuous submersion at 1.5m water depth for 100+ hours without moisture ingress.
  • Compensated temperature range (-40°C to +80°C) prevents thermal span drift in Iraqi desert climates.
  • Equipped with 15m 6-Core Armored Stainless Braided Cable with internal water-blocking filler to prevent capillary fluid migration.

Mounting Kinematics & Side-Load Rejection

Integrated gas-discharge lightning arrestor protecting against electrical thunderstorms.

Self-Centering Action Spherical convex rocker geometry automatically restores bridge alignment after heavy vehicle dynamic braking.
Thermal Expansion Absorbs up to ±15mm longitudinal steel deck thermal movement from -20°C winter to +75°C summer.
Anti-Lift-Off Protection Integrated stay rods and upper retaining collars prevent platform tipping during high crosswinds and uneven axle entry.

ac-1a-25t: Wiring Pinouts, Conductor Coding & Summing Interfacing

Hardware Interface Map
Standard 4-Wire / 6-Wire Color Code
RED + Excitation Supply (+Exc): 5V - 15V DC
BLACK - Excitation Return (-Exc)
GREEN + Signal Output (+Sig): 2.0 ± 0.002 mV/V
WHITE - Signal Return (-Sig)
BLUE / BRN + / - Sense Leads (6-Wire Remote Sensing)
YELLOW Braided Shield / Earth Ground: 15m 6-Core Armored Stainless Braided Cable
System Automation & Summing Interfaces
  • Bridge Impedance: Input 700 ± 7 Ω | Output 703 ± 4 Ω ensures balanced summation in multi-cell weighbridges.
  • Sensitivity Calibration: 2.0 ± 0.002 mV/V with combined error ≤ ±0.02% FS guarantees trade precision.
  • Digital / Analog Summing: Direct connection to stainless junction boxes with multi-turn corner trimmers.
  • Overload Barrier: Safe overload 150% FS and ultimate overload 300% FS.
10,000A Transient Surge Suppression Advisory: To protect ac-1a-25t from lightning strikes and Iraqi power grid surges, all multi-conductor signal cables must terminate in a heavy stainless junction box equipped with multi-stage gas discharge tubes and low-capacitance TVS diodes bonded to an earth earthing electrode (< 1.0 Ohm resistance).

ac-1a-25t: Regional Field Performance Across Iraq & COSQC Stamping

COSQC Legal Verification
Southern Iraq (Basra & Khor Al-Zubair)

High groundwater with extreme sulfate concentrations (>3,500 mg/L) causes rapid pin corrosion in generic cells. ac-1a-25t features sealed construction tested for high saline and petrochemical marine environments.

Central Iraq (Baghdad & Western Desert)

Summer ambient temperatures reach +55°C, with direct metal surface exposure exceeding +75°C. Internal temperature compensation (-40°C to +80°C) preserves legal calibration.

Kurdistan Region (Erbil, Sulaymaniyah, Bazian)

Cement plant complexes and aggregate quarries generate intense dust and 45-ton axle shocks. Heavy metallurgy withstands abrasive silica dust without mechanical binding.

Iraqi COSQC Legal Metrology Compliance & Stamping

This component satisfies all regulatory requirements mandated by the Iraqi Central Organization for Standardization and Quality Control (COSQC) for trade-approved weighing instruments (OIML R60 C3 Approved).

OIML R60 / R76 Test Reports Verified Wire Lead-Seal Provision for Legal Stamping Bwer Annual Stamping & Calibration Service Available

Need Detailed CAD Dimensions & Technical Drawings?

We provide dimensional 2D AutoCAD (.DWG), 3D STEP models, and full PDF wiring schematics for engineers and electrical panel integrators.

Request CAD & Wiring Diagram
RELATED HARDWARE

Similar Load Cells (Tab 1) Inventory

View All 52 Components
8-2a25t 25 Ton (25,000 kg)
8-2a25t
8-2b22t 22 Ton (22,000 kg)
8-2b22t
ac-2a-25t 25 Ton (25,000 kg)
ac-2a-25t
ac-3a-30t 30 Ton (30,000 kg)
ac-3a-30t
Get In Touch

Consult With Our Weighbridge Engineers

Contact our engineering department today for customized advice, foundation drawings, and transparent pricing tailored to your site.

60-Minute Response Guarantee
Free AutoCAD Foundation Drawings
Iraqi COSQC Certified Partner

Hızlı Mühendislik Fiyat Teklifi

Teknik şartname, temel projesi ve şeffaf fiyatlandırma 60 dakika içinde

🔒 %100 Gizlilik Garantisi • Resmi Üretici Güvencesi • Taahhütsüz Danışmanlık

Direct Engineering Line

24/7 Acil Teknik Hat
+964 770 654 5544

Tüm Irak vilayetlerinde kıdemli kantar mühendisleri ile doğrudan iletişim

Anında WhatsApp Danışmanlığı

Instant
+9647706545544

AutoCAD temel projeleri, fiyat listeleri ve teknik kataloglar hemen cebinizde

Main Offices

Iraq Nationwide
Bağdat (Merkez): Industrial Area, Iraq
Kürdistan & Kerkük: Kalar / Sulaymaniyah Highway
Basra & Güney: Logistics & Port Services

Gezici mühendislik ve kalibrasyon ekiplerimiz Irak genelinde 24-48 saatte sahada