IN STOCK IRAQ WAREHOUSE (ERBIL / BAGHDAD) | IP65 Front Bezel | COSQC IRAQ VERIFIED
TEC 1610 Indicators & Terminals (Tab 2) TAB-2

TEC 1610 High-Precision Dual-Scale Weighing Terminal

Slow-motion weigh-in-motion (WIM), dynamic highway enforcement, dual platform truck scales.

Inquire Price & Stock All 52 Components
HARDWARE OPTICAL VIEW 100,000 Div • Alibi
TEC 1610 High-Precision Dual-Scale Weighing Terminal 100,000 Div • Alibi IP65 Front Bezel
Metrological Verification: OIML R76 / R134 Weigh-In-Motion Class
Terminal Capacity
Simultaneous Axle Weight & Gross Vehicle Mass (Up to 150t) Up to 100,000 divisions
Front Enclosure
IP65 Front Bezel Cabin dust & splash sealed
Overload Alert
Real-Time Wheel & Axle Imbalance Warning Capacity safety interlock
Surge Protection
Industrial Switch-Mode Power Supply 100-240V AC with Earth Filter Utility grid transient barrier
Accuracy Class
OIML R76 / R134 Weigh-In-Motion Class OIML R76 / COSQC legal trade
Operating Temp
-20°C to +60°C Weigh-cabin operational span
Chassis Alloy
Heavy-Duty Industrial Anodized Enclosure Stainless / Die-Cast Aluminum
A/D Linearity
< 0.001% FS High-speed sigma-delta converter

Precision Metrology & Electrical Specifications

SPEC VERSION: 2026.1 / CALIBRATION VERIFIED
Scroll table horizontally to view complete data
Structural Architecture High-Precision Dual Scale Terminal
Calibrated Division & Scale Capacity Simultaneous Axle Weight & Gross Vehicle Mass (Up to 150t)
A/D Converter Resolution & Conversion Rate 0.08 μV/d Ultra-Sensitive 24-Bit A/D Converter (500 Hz)
A/D Linearity & Calibration Error < 0.001% FS
Load Cell Excitation Drive Capacity Input: Dual Load Cell Channels with Independent Zero Calibration | Output: Ethernet TCP/IP, Dual RS-232, Isolated Digital I/O (4 In / 4 Out)
Insulation Resistance Complies with IEC 61000-4 Surge and Burst Standards (Tested at 50V DC)
Mains Power & Battery Supply 10V DC, 400mA High Drive Capability
Compensated Temperature Range -20°C to +60°C
Electronic Safety & Surge Suppression Safe: Real-Time Wheel & Axle Imbalance Warning | Ultimate: Industrial Switch-Mode Power Supply 100-240V AC with Earth Filter
Integral Cable Specification Ruggedized Industrial Terminal Blocks with Shield Lug

TEC 1610: Enclosure Architecture, Industrial Ergonomics & Thermal Management

Metrological Terminal & Processor Architecture
TEC 1610 Chassis Metallurgy & Front Bezel Protection

Heavy-Duty Industrial Anodized Enclosure. Engineered for 24/7 continuous weigh-cabin operation in Slow-motion weigh-in-motion (WIM), dynamic highway enforcement, dual platform truck scales.

  • Heavy 304 stainless steel or die-cast aluminum chassis provides superior EMI/RFI shielding.
  • Front-panel silicone membrane keypad tested for >1,000,000 tactile keystrokes with tactile click feedback.
  • Adjustable multi-angle swivel mounting bracket allows desktop, wall, or control panel flush installation.
Environmental Protection & Display Clarity (IP65 Front Bezel)

Sealed front panel engineered to withstand dusty scale cabins and high ambient light.

  • IP65/IP66 front panel sealed against fine sand dust, moisture condensation, and office spills.
  • High-contrast graphic or LED display provides wide 160° viewing angles in brightly lit weigh cabins.
  • Double internal conformal coating on all digital and analog PCBs protects micro-traces from humidity corrosion.

Power Supply Resilience & Tamper-Proof Audit Rigor

Simultaneously captures individual axle weights, axle group weights, and total gross vehicle mass while vehicle crosses scale at speeds up to 15 km/h.

Iraqi Grid Fluctuation Immunity Ultra-wide input voltage tolerance (10V DC, 400mA High Drive Capability) effortlessly survives sudden generator transfers and line dips.
Emergency Battery Backup Internal rechargeable battery maintains full weighing and ticket printing during utility power blackouts.
Hardware Metrology Lock Mechanical calibration jumper sealed behind a lead-wire screw prevents illegal recalibration in compliance with COSQC rules.

TEC 1610: Multi-Port Interfacing, Network Protocol & Peripheral Port Map

Hardware Interface Map
Rear Panel Industrial Port Mapping & Pin Allocation
LOAD CELL (DB9/7P) +Exc, -Exc, +Sig, -Sig, +Sen, -Sen, Ground (Dual Load Cell Channels with Independent Zero Calibration)
COM 1 (RS-232) Baud 1200–115200: Direct PC software streaming & continuous Modbus
COM 2 (RS-485 / CL) 2-Wire differential / 20mA Current Loop to outdoor remote scoreboards: Ethernet TCP/IP, Dual RS-232, Isolated Digital I/O (4 In / 4 Out)
ETHERNET (RJ45) 10/100 Mbps TCP/IP: Direct SQL database, SAP, and Weigh-OS integration
ANALOG OUT 4–20mA / 0–10V Opto-isolated process output for PLC automation
RELAY I/O 4 Opto inputs + 4 Relay outputs (Traffic lights, barrier gates, alarms)
Software Features & Metrological Storage
  • Conversion Rigor: 0.08 μV/d Ultra-Sensitive 24-Bit A/D Converter (500 Hz) provides ultra-stable weight display in under 1.5 seconds.
  • Alibi Non-Volatile Memory: Automatically logs up to 100,000 transaction records with zero data loss.
  • Multilingual Ticket Printing: Direct output to Epson and dot-matrix printers in Kurdish, Arabic, and English.
  • Surge Suppression: Industrial Switch-Mode Power Supply 100-240V AC with Earth Filter protects sensitive analog converters.
Clean Earthing & Surge Suppression Mandate: The ground terminal of TEC 1610 must be connected to an isolated clean instrument earthing rod (< 1.0 Ohm) to protect sensitive 24-bit analog circuitry from industrial inductive kickback from nearby motors and generators.

TEC 1610: Regional Field Performance Across Iraq & Power Grid Stability

COSQC Legal Verification
Southern Iraq (Basra Customs & Oil Terminals)

Heavy 24/7 dispatch cycles at Khor Al-Zubair and Safwan borders require internal thermal dissipation fans and tropicalized conformal PCB coatings.

Central Iraq (Baghdad & Industrial Corridors)

Extreme summer temperatures (+55°C) and violent national grid power surges require the wide-range internal PSU and dual-stage TVS line protection.

Kurdistan Region (Erbil, Sulaymaniyah & Border Gates)

High-speed weighing transactions for cement tankers and commercial trucks at Ibrahim Khalil and Parwezkhan with bilingual ticket receipts.

Iraqi COSQC Legal Metrology Approval (OIML R76 / R134 Weigh-In-Motion Class)

Certified compliant with OIML R76 Class III trade standards (10,000e approval). Meets legal requirements for Ministry of Trade and Ministry of Construction highway scales.

OIML R76 Class III Approval Certified COSQC Wire Lead-Seal Provision Included Alibi Audit Memory Tamper-Proof

Need Detailed CAD Dimensions & Technical Drawings?

We provide dimensional 2D AutoCAD (.DWG), 3D STEP models, and full PDF wiring schematics for engineers and electrical panel integrators.

Request CAD & Wiring Diagram
RELATED HARDWARE

Similar Indicators & Terminals (Tab 2) Inventory

View All 52 Components
SCA1 Up to 999,999 kg / 100,000 Divisions
SCA1
SCA12 Multi-Interval / Multi-Range up to 150 Ton
SCA12
KRONOS Unlimited Display Capacity / Multi-Range
KRONOS
BM1000 Dual Scale Management (Scale 1 & Scale 2)
BM1000
Get In Touch

Consult With Our Weighbridge Engineers

Contact our engineering department today for customized advice, foundation drawings, and transparent pricing tailored to your site.

60-Minute Response Guarantee
Free AutoCAD Foundation Drawings
Iraqi COSQC Certified Partner

Hızlı Mühendislik Fiyat Teklifi

Teknik şartname, temel projesi ve şeffaf fiyatlandırma 60 dakika içinde

🔒 %100 Gizlilik Garantisi • Resmi Üretici Güvencesi • Taahhütsüz Danışmanlık

Direct Engineering Line

24/7 Acil Teknik Hat
+964 770 654 5544

Tüm Irak vilayetlerinde kıdemli kantar mühendisleri ile doğrudan iletişim

Anında WhatsApp Danışmanlığı

Instant
+9647706545544

AutoCAD temel projeleri, fiyat listeleri ve teknik kataloglar hemen cebinizde

Main Offices

Iraq Nationwide
Bağdat (Merkez): Industrial Area, Iraq
Kürdistan & Kerkük: Kalar / Sulaymaniyah Highway
Basra & Güney: Logistics & Port Services

Gezici mühendislik ve kalibrasyon ekiplerimiz Irak genelinde 24-48 saatte sahada